Phantom Flex 4K GS

To shoot a video/music video, commercial, movie, or fashion show, you need the right location and equipment, right?

Camera Rental

Looking for a high-performance camera to bring your vision to life? Look no further - we have a wide selection of professional-grade cameras at your disposal!

Short Description

The Phantom Flex4K digital cinema camera records up to 1,000 fps at 4K resolution, provides exceptional image quality and offers production-friendly features like auxiliary power outputs and a full-featured on-camera control interface.

Throughput/Speed

9 Gpx/second.

Max speed at full resolution of 4096 x 2304 is 938 fps

At 4096 x 2160 max speed is 1000 fps

At 2048 x 1080 max speed is 1977 fps

Sensor Specifications

CMOS sensor

4096 x 2304 pixels

6.75 µm pixel size

27.6 mm x 15.5 mm

Super-35mm; 31.7mm diagonal

Super-16mm format at 1920 x 1080

Base ISO Color 200D; 250T

Exposure index range 250-1250

Recommended EI 800-1000 Color

Base ISO Monochrome 800D; 2000T

12-bit

Exposure

Exposure time (shutter speed): 5μs to 1/frame rate

Can be set in degrees or microseconds (μs)

1-millisecond progressive scan (aka rolling) shutter

Memory

64 or 128GB high-speed internal RAM

CineMag V (2TB, 8TB), CineMag IV, CineMag IV PRO for non-volatile storage (1TB, 2TB)

Record Times

5 seconds at 1000 fps, 4096 x 2160 resolution and into 64 GB of internal memory

2TB CineMag IV holds 2 hours of 4K Cine raw playback at 24p

2TB CineMag IV holds over 4 hours of 4K ProRes HQ playback at 30p

Special Features

Three main 3G HD-SDI outputs, supporting dual-link 4K video and simultaneous live monitoring / playback

HD-SDI can switch between Rec709 and Log

Supports both HD-SDI and component based viewfinders

Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)

Secondary IP address

Segment memory for multi-cine acquisition

Field-based firmware upgrade capable

Several mounting holes for accessories on camera body

Triggering

Programmable trigger location (pre/post trigger recording)

Trigger from camera body or via software

Hardware trigger via Sync port

Trigger inputs also available on 3-pin accessory ports

Timing and Synchronization

Frame synchronization to internal or external clock (FSYNC)

Genlock sync available through HD-SDI return signal

IRIG in/out (modulated or unmodulated)

SMPTE time code support

Signaling

4x 3G HD-SDI output BNCs (one reserved for viewfinder)

1x 3G HD-SDI return BNC, supports Genlock

Sync connector for Trigger, time code, F-sync, AES/EBU Audio (via MiniBob or Capture cable)

Remote (RCU) port

Component viewfinder port

Four Aux ports for power and trigger

(2x 12VDC and 2x 24V)

Connectivity

Gb Ethernet for both control and data

10Gb Ethernet on CineStation IV

Camera Control

Phantom Camera Control (PCC)

On-Camera Controls

Remote Control Unit (RCU), connects direct to camera

SDK available

Video Out

Three main 3G HD-SDI, supports dual-link 4K video or 3x scaled 1080p outputs.

Additional HD-SDI reserved for viewfinder

Component viewfinder port

Video outputs switchable between Rec709 & Log

Lensing

PL-mount standard

Video Processing

Brightness

Gain

Gamma

Saturation

Color temperature

Color matrix

Tone curve

Log mode

Image flip and rotate in PCC

Crop & Scale

Motion Analysis

Basic measurements via Phantom Application:

Distance

Speed

Acceleration

Angles and Angular Speed

Manual and Automatic point collection for target tracking

Compatible with 3rd party solutions

Supported File Formats

Cine raw and Apple ProRes 422 HQ CineMag recording

PCC Cine file conversion to: Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX